Simple Water Pressure Sensor
The PS-1 Irrigation Pressure Switch adds irrigation water on/off
data into the soil moisture data set. On/off data is a critical
parameter to add to your system when using soil moisture sensors to
monitor irrigation because it enables you to know your irrigation
times.
The PS-1 registers ON at 5 PSI (±1.0 PSI). Because the sensor must
be plumbed into the irrigation line, your data logger should be
located where this can be done conveniently and cleanly.
| Specifications |
| Set Point |
5 psi switch (±1 psi) |
| Maximum Pressure |
250 psi |
| Proof Pressure |
750 psi |
| Media Connection |
1/8 NPT male brass |
| NEMA Rating |
4, 13 |
| Diaphragm Material |
BUNA N |
| Electrical Connection |
5 metre cable w/ 3.5mm connector for use with ZL6 logger |
We periodically send an email
newsletter containing updates, new product releases, training and
advice. If you would like to receive these please subscribe
below.
Labcell Limited
exclusively supply and support METER products in the UK &
Ireland.
Non UK/Ireland Customers, please contact METER Environment at:www.metergroup.com/environment/
