| Specifications |
| Inputs |
4
|
| Measurement ranges |
±10 , ±20 , ±50 , ±100 , ±200, ±500mV, ±1 , ±2 , ±5 , ±10 , ±20
, ±60 V |
| Internal resolution |
16 bit |
Internal sampling rate per Channel
|
10 kHz
|
Measurement data range per channel
|
1, 2, 5, 10, 50, 100, 500 Hz und 1, 2, 5, 10 kHz
|
Input Protection
|
±100 V permanent, additional ESD protection
|
SW input filter
|
Selectable Butterworth filter 6th order, range: 0.1 Hz to 2
kHz |
HW input filter
|
Low-pass filter 3rd order, approx. 2 kHz |
Sensor Excitation
|
±5, ±8, ±10, ±12, ±15 V DC per channel typ. ±30 mA, selectable
and adjustable per channel |
Galvanic Isolation
|
500 V DC |
EtherCAT interface
Configuration
|
Ethernet 100Base-TX, 100 MBit/s
EtherCAT slave controller
via EtherCAT master using CANopen over EtherCAT (CoE),
all settings and configuration data stored in the device |
Connectors
EtherCAT / voltage
Signal inputs
|
LEMO 1B 8-pole
LEMO 1B 6-pole |
Power Supply
|
Approx. 6 V to 50 V DC
|
Power Consumption
|
2.5W (without sensor excitation)
|
| Operating temperature |
-40 ° C to +185 ° C |
| Dimensions |
200 x 35 x 50mm
|
| Weight |
500 g |
| Protection Class |
IP67
|
